What's new:

[x] Fixed "Cannot get info from OEMINFO server" error


[x] Added bootloader loading via testpoint / HUAWEI USB 1.0 port (this will help fixing dead phones and allow firmware write once the phone boots in fastboot mode once the boot operation ends)


[x] Added "Testpoints files" tab with automatic download for the testpoint pictures


[x] Model Chhange /Country change / Vendor change now works via tespoint too . Can help setting up correct info before attempting flash in update mode (vol up + down + insert usb)


[x] Now you can do demo remove (region conversion) for HUAWEI P20 (EML-LXX) / HUAWEI P20 PRO (CLT-LXX) etc series using tespoint so no more BOOTLOADER unlock needed buy codes

NOTE:
For bootloader booting via testpoint be sure that the proper loader is selected. Can check the cpu here PhoneDB - The Largest Phone Specs Database
When several loaders are available for the same cpu type please try all one by one till you obtain an positive result.
Don't forget to reattach phone between tries


SMALL TUTORIAL FOR VENDOR / COUNTRY CHANGE ON HUAWEI P20 / P20 Pro:

1. Make the TP so that the 'HUAWEI USB 1.0' port gets visible
(can get the drievrs from https://drive.google.com/uc?authuser...xport=download)
1. Go Update OEMINFO tab
2. Mark 'Use bootloader' and select Kirin970_Tx_Vx and press update (x here marks the fact that you must try all the available Kirin970 loader until you find the one that matches your device)
3. Once the proper bootloader is found (means boot written and phone goes in fastboot mode) reconnect the phone with TP so that the 'HUAWEI USB 1.0' port gets visible
4. Now mark 'Update OEMINFO' as well and select EML-L oeminfo file
5. Set 'hw' for the vendor and 'normal' for the country and 'EML-L29' / 'EML-L09' for the 'model' (no quotes for teh values)
6. Press Update
7. Once this process ends put the phone in upgarde mode ( vol up + down and insert usb while keepting the volume keys pressed)
8. Go 'Update firmware' tab and select update_EML-L29_8.1.0.109(SP5C900)_hw_normal.cfs if the model is 'EML-L29' or update_EML-L09_8.1.0.109(SP5C900)_hw_normal.cfs if the model is 'EML-L09'
9. Press 'Update'
10. If all made properly then you have a fully converted demo phone now

NOTE: For P20 pro at step 8 you must write both firmwware and the customisation




DON'T FORGET THAT RESURRECTOR ACTIVATION BRINGS FREE AND UNLIMITED UNLOCK FOR:


HUAWEI Y5 2018
HUAWEI Y5 Prime 2018
HUAWEI Y5 Lite
HUAWEI HONOR 7S
HUAWEI DUA-L22
HUAWEI DRA-L01
HUAWEI DRA-L02
HUAWEI DRA-L21
HUAWEI DRA-L22
HUAWEI DRA-L23
HUAWEI DRA-L42